Rhodius RH403S + LD404 ALL IN ONE Ø 150 mm (353315) 304014 Wall chaser 150 mm 2300 W 230 V

DIY & Tools > Power Tools > Sanders & Grinders

With the RH403S the slots and channels can be slit easily and quickly, for example in the masonry. The device electronics include a soft start-up, a temperature and overload switch-off as well as an overload display. In addition, the machine is characterized by a slim design. For the wall milling cutter, Rhodius offers the two diamond cutting discs LD403S with a width of 19 mm and LD404 with a width of 28.5 mm with diameters of 125 mm and 150 mm. Perfect wall slots are formed through the ALL IN ONE system with staggered segments. The low distance of the protective flap allows milling with diamond discs for working close to the edge up to 18 mm. By adjusting the protective cover, they can be infinitely adjusted to the slot depth of 12 - 45 mm without tools. Due to the split safety spindle with precisely fitting spacer rings, craftsmen can easily replace the tool, reducing the set-up time to a minimum. The ALL IN ONE can only be used with the split spindle. The milling machine is also equipped with a flexible safety cable. The nozzle with a diameter of 35 mm is intended for direct connection of an industrial vacuum cleaner of the Class M. The ergonomic handle with switch inclusive of switch lock as well as the sliding cut serves for comfortable and precise operation Min Power requirement of machine: Ø125mm - 1,800 W / Ø 150 mm - 2,200 W Not suitable for use on angle grinders.Machine suitability: The Rhodius RH403 S wall slot cutter is designed perfectly for the Rhodius ALL IN ONE diamond racing wheels. The delivery includes 1 × RH403 S wall cutter, 1 × LD404 ALL IN ONE diamond cutting disc (for 20 and 25 mm empty pipes), 2 × spacers 11 mm for LD404, 2 × spacers 17 mm for LD402 and 1 × robust metal case. Spacer rings for single-disc use and snap-out tools are available in the kit. Material suitability: The combination Rhodius RH403 S and Rhodius ALL IN ONE allows easy milling of wall slots in just one step. It plays its strengths fully in aerated concrete, pumice, concrete and shambles and allows for an extremely fast working. Construction and production: The Wall slit milling cutter is equipped with a powerful, high-torque 2,300 W motor and is characterized by a very slim design. Thanks to the split safety spindle and precisely fitting spacer rings, craftsmen can change the diamond discs effortlessly and quickly. The setup time is reduced to a minimum. The Rhodius RH403 S masonry milling cutter has a soft start, a temperature and overload cut-off as well as an overload display. An industrial vacuum cleaner of the class M can also be directly connected to the RH403 S. The suction hose lock prevents unintentional loosening of the hose during trimming. Quality: The RH403 S wall groove milling cutter gives the user the best Rhodius tool in his category. Rhodius Topline products stand for the highest level of performance and quality. Application: The RH403S can be used to slit grooves and channels in masonry easily and quickly. The annoying task of removing the center bar is no longer necessary. The combination of Rhodius wall slot cutter RH403S and the ALL IN ONE diamond disc system makes both cuts at the same time thanks to the unique design of the twisted diamond segments. D The material is carried to the outside. This operating principle prevents a quick disintegration of the glass. The result is a custom-fit wall slot without reworking. The material is removed quickly, cleanly and almost completely. With the combination RH403 S plus ALL IN ONE the user is almost 50% faster at the goal when cutting walls. Dimensions: The Rhodius RH403 S wall slot cutter can accommodate the Rhodius LD402 Rhodius diamond cutting discs with a width of 18 mm and the Rhodius LD404 with a width of 28.5 mm. For diameters, you can select between 125 mm and 150. The small distance between protective cover and diamond disc allows you to work up to 18 mm close to the edge. The cutting depth can be set easily and comfortably from 12 mm to 45 mm without any tools. Industries: Rhodius wall milling cutter RH403 S is the perfect tool for everyday challenges in building and plumbing, interior design and renovation. It makes the work easier, cleaner and above all faster.This text is machine translated.

Price: EUR 1621.96