Cars & Hobbies & Household > Model Railway > I Gauge
Owing to increased power requirements in heavy and fast goods traffic the series 151 appeared in 1972 as an enhancement of the series 150. Their construction provided for freight traffic speeds of up to 120 km/h and draft loads of up to 2,000 tons, WAS could only be reached by a locomotive with a power of over 5,000 kW. Krupp and AEG were responsible for the construction of the 151. Thanks to the extreme application of lightweight construction technology, the required wheel set load could be maintained despite the more powerful main transformer and reinforced electrical resistance brake. The first was the 151 001 in chromium oxide green paint on 21 November 1972, which was retained until the 151 075 (with the exception of the 151 073) was delivered.Heavy goods train locomotive series 151 from the Deutsche Bundesbahn (DB). Chromium oxide green coloring. Operating number 151 034-6. Operating state of the EP. IV at 1975/1976.Model: Completely new construction, chassis with main frame and locomotive assembly made of die-cast zinc. Many separately applied brass rotary die-cast parts. With digital decoder mfx with up to 32 functions, integrated buffer capacitor configurable, regulated high-power drive and extensive sound functions such as driving noise, fan, locomotive whistle, other announcements and warning messages. Operation possible with alternating current, direct current, Maerklin Digital and DCC. High speed motors with drive on all axles. Current buffer can be parameterized. In digital mode the pantographs can be raised/lowered via a motor. White/red LED head end signal in change of direction of travel, conventional in operation, can be switched digitally. Machine room lighting can be switched, LED lighting in the driver's cabs as well as start-up lamp dependent on the direction of travel. Driver's cab doors can be opened, interior fittings, driver's cab with engine driver figure. Handle bars made of metal and many other details such as: Signs, wipers, pipes etc. Headstocks with spring buffers and attached brake lines. Serially installed remote control coupling rear, screw coupling in front. Can be exchanged for the other type of coupling (included in the delivery). Accessible minimum radius 1,020 mm Length over buffers 60.9 cm. Weight 6.9 kg approx.This text is machine translated.