FESTO Rotary actuator 8087820 ERMS-25-180-ST-M-H1-PLK-AA 3 A
Automation & Pneumatics > Automation > Drive Engineering
Additional technical information: Protection class: IP40Ambient temperature: 0 °C - +50 °CProduct weight: 1,472 gMaterial casing: Aluminum wrought alloy, anodizedLED displayStorage temperature: -20 °C to +60 °C.Relative humidity: 0 - 85 %Approval: RCM MarkMounting type: With internal threadNote on ambient temperature: Above the ambient temperature of 30 °C, a power reduction of 2 % per K must be observed.All mounting positions permittedVibration resistance: Transport application test with sharpening degree 1 according to FN 942017-4 and EN 60068-2-6Shock resistance: Shock test with sharpness 1 according to FN 942017-5 and EN 60068-2-27Peak torque 2.7 NmRated motor current 3 A.Rotor position sensor: Encoder absolutely single turnRotor position sensor measuring principle: MagneticRotor position sensor resolution: 16 bitsProtection class IIIPermissible voltage fluctuations: +/- 15 %Number of digital logic inputs: 2Switching logic inputs: PNP (positive switching)Properties of logic input: Configurable, not electrically isolatedSpecification of logic input: In accordance with IEC 61131-2, type 1Operating range logic input 24 VNumber of digital logic outputs 24 V DC: 2Switching logic outputs: PNP (positive switching)Properties of digital logic outputs: Configurable, not electrically isolatedMax current digital logic outputs: 100 mASize 25Constructive design: Electromechanical rotary drive, with integrated drive, with integrated gearRotation angle 180 °Transmission ratio 9:1Twist play 0.2 degRepeat accuracy ±0.05 °Position detection: Motor encoderMax. Axial load 350 N.Max. Radial force 450 NPermissible mass moment of inertia: 0.0065 kgm2Step angle at full step: 1.8 degStep angle tolerance: ±5%Duty cycle: 1Power supply, connection type: PlugPower supply, connection method: M12x1, T-coded according to EN 61076-2-111Power supply, number of poles/wires: 4Logic interface, connection type: PlugLogic interface, connection technology: M12x1, A-coded according to EN 61076-2-101Logic interface, number of poles/cores: 8Logic interface, connection diagram: 992264Max. Cable length: 15 m outputs, 15 m inputs, 20 m with IO-Link operationMax current consumption: 3 AIO-Link, SIO mode Support: YesIO-Link, protocol: Device V 1.1IO-Link, communication mode: COM3 (230.4 kBaud)IO-Link, port type: A.IO-Link, number of ports: 1IO-Link, process data width OUT: 2 bytesIO-Link, process data content OUT: 1 bit (Move in), 1 bit (Move out), 1 bit (Quit Error)IO-Link, process data width IN: 2 bytesIO-Link, process data content IN: 1 bit (state device), 1 bit (state move), 1 bit (state in), 1 bit (state out)IO-Link, service data content IN: 32 bit force, 32 bit position, 32 bit speedIO-Link, minimum cycle time: 1 msIO-Link, data storage required: 0.5 kilobytesIO-Link, connection pin: PlugParameterization interface: IO-Link, user interfaceInsulation protection class: BMotor type: Stepper motorReferencing: Fixed stop block positive, fixed stop block negativeAdditional functions: User interface, integrated end position detectionOperational readiness display: LEDAngular acceleration: 140 wheel/s2Interface code base: E8-55KC-MARK: KC-EMCFlange material: Anodized aluminum wrought alloy; Nominal current: 3 A; Nominal voltage: 24 V; Rotational speed (details): 150 U/min
